Masterbatches Transparent

masterbatches transparant (MB TR)

PLASTIC MASTERBATCHES
TRANSPARANT COLOUR MASTERBATCHES
(KODE: TR)

Geser tabel ke kanan untuk melihat seluruh data.

PLASTIC MASTERBATCHES TRANSPARANT COLOUR MASTERBATCHES (KODE: TR)
No	Product Name/Type	Heat Resistance °C	APPLICATION
No	Product Name/Type	Heat Resistance °C	Food Contact	Heavy Metal Free	Outdoor
1	MB BLUE TR-891	270	√	√	√
2	MB BLUE TR-111	200	□	√	□
3	MB BROWN TR-162	200	□	□	□
4	MB GREEN TR-021 F	260	√	√	√
5	MB ORANGE TR-611 F	260	√	√	□
6	MB PINK TR-541 F	280	√	√	√
7	MB PURPLE TR-371 F	280	√	√	√
8	MB RED TR-531	280	√	√	□
9	MB YELLOW TR-131 F	260	√	√	□
10	MB GREY OP 131	270	√	√	√
11	MB ORANGE OP 041	280	√	√	□
12	MB ORANGE OP 233	280	√	√	√
13	MB PINK OP 621 F	280	√	√	□
14	MB PURPLE OP 552	230	√	√	√
15	MB RED OP 121	220	□	√	□
16	MB YELLOW OP 791 LF	200	□	√	□
17	MB YELLOW OP 742	240	□	□	√
18	MB YELLOW OP 743	200	□	□	□

The above data sheet is to the best of our knowledgement. Our masterbatches colouring plastic offered in good faith, but without guarante, as conditions and methode of utilitazation of our product are beyond our control. We recommend that the prospective user determine tha suitability of our materials before adopting them on a commercial scale.

NOTE:
√ = Recommended
□ = Not Recommended
Form: Granules or pellet
Packaging: 25 Kilograms Zak/Paper Bag
Dosage use: 1-2 phr (per hundred resin)
Knowledge of our plastic masterbatches is Food Contact Approval, Heavy Metal Free, Outdoor application or not and Heat Resistance specification

Food Contact Approval
Product recommended because the materials used in the product conform to food regulation.

Heavy Metal Free
Product recommended because the materials used in the product conform to EN 71-3:1994 regulation. This masterbatches produces a range of Heavy Metal FREE masterbatches to meet the most stringent international regulatory standards. This masterbatches suitable for colouring thermoplastic, polyolefins, engineering polymers and engineering resins plastic.

Heat Resistance
Heat resistance indicates the maximum temperature (in °C) at which a change of color occurs no greater than rating 4 on ISO 105 AO2 1-5 gray scale, up to dwell time of 5 minutes in the barrel of an injection moulding or extrusion.

Outdoor Application
Product recommended for use in outdoor plastic products